Skip to main content

Aircraft

Temperature Matters

May 11, 2021

In addition to having good contact with connectors and getting accurate readings, there are some other important things to remember when doing temperature testing.
Read Article >

Pass the temperature probe

May 4, 2021

The first step is to run the A/C system for a few minutes to let it stabilize. Then both probes should be connected side by side at both points that will be temperature tested in the system. For example, if you were testing the temperature drop across the condenser, this would need to be done on both the discharge line and the liquid line.
Read Article >

Are you using the right tools for mobile A/C repair?

April 30, 2021

Your shop’s R-134a recovery/recycling/recharge (R/R/R) machine is in well-maintained condition. You have an R-1234yf gauge manifold set and an R-1234yf machine is on order; should arrive shortly.
Read Article >

Contact counts in temperature testing

April 27, 2021

Proper contact is vital when connecting to A/C lines using the contact type temperature thermometers. To determine if I am getting good contact, I always like to place both connectors side by side on the same line and observe the temperature readings.
Read Article >

MACS Mobile A/C Update Webinar Now Available On Demand

April 22, 2021

Every year the Mobile Air Climate Systems Association creates a special mobile A/C update clinic to help working technicians keep up with the rapidly changing mobile A/C service and repair...
Read Article >

Tips for taking your mobile A/C system’s temperature

April 20, 2021

The contact type units do indeed have a high degree of accuracy, but precautions must be taken when using them (especially connecting to lines) to ensure the accuracy. Otherwise, it is possible to get readings that are easily 5° to 10° off and that can lead to an incorrect diagnosis.
Read Article >

Caveman to Mr. Cool

February 18, 2021

Over 300,000 years ago, modern man began walking the earth relying heavily on his five senses-- especially sight – to hunt, find joy, and avoid danger. In 1914, Garrett Morgan, who decided it was important to protect man’s eyes during hazardous situations, developed what we know today as ‘safety’ glasses.
Read Article >

Safety Alert: Online Sales of Cool Penguin F-12

November 23, 2020

Refrigerant safety alert
Read Article >