Skip to main content

Cab

Did you install the condenser upside down and backwards?

July 27, 2021

The vehicle was a 1998 Chevrolet C 1500 truck with a 5.7 engine. The issue was excessive high side pressure. Almost as soon as the compressor clutch engaged, the high side pressure was over 400 PSI, and the high-pressure cut-off was turning the compressor on and off.
Read Article >

Top three tips on orifice tube behavior

July 20, 2021

In the last four MACS blog articles we covered a lot of detailed information about orifice tube system behavior. We examined a system with a full refrigerant charge verses a 25% undercharge. Now it is time to condense it all down into three important takeaways.
Read Article >

Low refrigerant charge and the search for real data part 4

July 13, 2021

When we examined the pressure readings and vent temperature readings last week, there was nothing showing up that indicated any charge issues (even operating with the 25% undercharge).
Read Article >

What’s the word on R-134a price & supply?

June 24, 2021

The email questions are already coming in, and they go kind of how you’d expect: What’s going on with the price of R-134a? Is there going to be a shortage of R-134a supply?
Read Article >

Low refrigerant charge and the search for real data

June 22, 2021

I had read about how low refrigerant charges could increase compressor operating temperatures and decrease the amount of oil flowing to compressors, but I had never been able to find results from any tests. After discussing this with MACS, we decided to do some testing to get some real data.
Read Article >

Refrigerant capacity and mobile A/C service: part 2

June 15, 2021

One of the most frequently asked questions on tech help-line calls concerns refrigerant capacity: How much refrigerant is in that mobile A/C system, and have you checked to be sure the refrigerant is pure?
Read Article >

Focus on the condenser!

May 31, 2021

In last week's article, we focused on applying temperature testing to an evaporator in an orifice tube system. In it we illustrated how and why a low liquid level in the evaporator can cause a large temperature differential between the inlet and outlet. We also indicated how and why raising the liquid level will cause the temperature differential to decrease. Now it is time to focus on the condenser.
Read Article >

Temperature testing detective work: The search for a diagnosis

May 25, 2021

Last week we closed our blog post with a discussion about an orifice tube system which had an evaporator outlet temperature that was about 20° warmer than the inlet. We mentioned that this could be an indication of a restricted orifice tube or a refrigerant undercharge. In applying this to diagnostics, it is important not only to understand what this represents, but also why.
Read Article >

What is your temperature testing data telling you?

May 18, 2021

If air conditioning systems were transparent where we could see inside them, then diagnostics would be faster and easier. We could look at the systems and see things right away that affect system operation, like restrictions and liquid levels in evaporators and condensers.
Read Article >

Temperature Matters

May 11, 2021

In addition to having good contact with connectors and getting accurate readings, there are some other important things to remember when doing temperature testing.
Read Article >