Temperature testing accuracy
April 13, 2021
Temperature readings can be easily used to determine if an orifice tube system might be undercharged, and they can also be used to charge an orifice tube system. But if the readings are not accurate, all they are going to do is cause you problems.Read Article >
Then things got complicated!
April 9, 2021
It was a 2013 Camaro. The complaint was poor cooling and the temp really would not change when you switched it from heat to cool. In diagnosing the job, the technician found the blend door was stuck to where it was blending heat. Until it was pulled out, the tech was not sure if it was a bad actuator or door.Read Article >
Preseason Training: A Service Manager’s Guide to Preparation
April 1, 2021
Proper training can limit the time period that any given mechanic spends in the novice stages of their career, and it may help them advance to expert performance levels in an expedited time period.Read Article >
How to deal with a compressor oil viscosity change
March 30, 2021
dealing with a catastrophic compressor failure where system flushing and component replacement removes all the oil from the system, then it is a matter of just installing the correct quantity of the oil that is specified for the replacement compressor.Read Article >
Does the compressor contain oil?
March 17, 2021
A question that comes up frequently on A/C tech lines is: Does the compressor contain oil and if so, how much?Read Article >
Marks Air celebrates 50 years of mobile air success
March 16, 2021
MACS member Marks Air Inc. celebrates 50 years of being in business.Read Article >
Tank full of air!
March 15, 2021
The problem is usually caused by excessive air in a system, and since too few shops use a refrigerant identifier, they don’t know when these problems come up, nor how often they are solving problems by doing this.Read Article >
Time to plug into EV training
March 10, 2021
Read any automotive publication or website, and you will see numerous stories from all the big automotive manufacturers and quite a few shiny new start-ups about vehicle electrification.Read Article >
Helpful tips to register for MACS online training clinics
March 5, 2021
Helpful tips on how to register for a class on the MACS websiteRead Article >
Proper compressor draining and filling procedures
March 2, 2021
A different procedure is required on a lot of other compressors and based on my tech line experience: a huge number of technicians are not aware of this.Read Article >
Let everyone know you are Section 609 certified
February 22, 2021
Section 609 work t-shirts in black featuring the new MACS logo.Read Article >