Sometimes it is user error
February 8, 2022
I encountered a situation in the early days of recovery/recycling machines when they had just been introduced. I had set up a machine about four months earlier when the customer purchased it. I went to great lengths to cover proper operation of the unit and the shop owner even attended a certification clinic I conducted.Read Article >
Air contamination in an A/C system can ruin your day
February 2, 2022
I had a memorable encounter with air contamination in the mid 1990s. I was conducting a lot of retrofit clinics at the time and had recently acquired a demo refrigerant identifier which I took to those clinics. At one clinic, there was a technician who was extremely interested in the refrigerant identifier.Read Article >
Air contamination in mobile A/C systems
January 18, 2022
We covered a base line test conducted with 0% air contamination and provided pressure and temperature information. This week we will provide pressure and temperature information experienced with 7.7% air contamination and 18.9% air contamination.Read Article >
The effects of air contamination in an A/C system
January 11, 2022
If you perform an Internet search for effects of air contaminated refrigerant on automotive A/C system pressures, you’ll find many results. This information leaves no doubt that air contamination of refrigerant in an automotive A/C system can affect system pressures and temperaturesRead Article >
When you don’t know about clutch wires
December 27, 2021
The conversation involved a clutchless compressor unit. A CSR who had sold one to a shop contacted me and said his customer (who was both the shop owner and technician working on the car) had just called him. There was a concern that the compressor didn't have a clutch wire.Read Article >
The pulse width modulated duty cycle signal
December 7, 2021
Several years ago, when vehicles using these compressors were just starting to show up at shops for service with some regularity, we were searching to find some detailed information about their behavior to use in clinics. There was not a lot of it available, so we borrowed several vehicles and did some videos. The following are some clinic slides produced from one of those videos.Read Article >
Diagnosing electronically controlled compressors
November 30, 2021
When preparing to conduct diagnostics on a system using an electronically controlled variable displacement compressor, the diagnostic process needs to focus on four areas.Read Article >
Exploring electronically controlled variable displacement compressors
November 23, 2021
Electronically controlled variable displacement compressors (ECVDs) have been in use now for over 15 years. However, there are a lot of technicians in the field who have very little knowledge about them and their operation.Read Article >
Electronically controlled variable displacement compressors
November 16, 2021
what if" this system used an electronically controlled variable displacement compressor instead of the pressure controlled variable displacement compressor? What would the results be?Read Article >
Meet MACS member, Tom Lech
November 8, 2021
Stationed in San Francisco, California, Thomas Lech has maintained a bustling business for almost three decades. Lech Auto Air Conditioning has been busy for 365 days a year from opening at 7 a.m. to closing at 7 p.m. for the last 27 years, with summertime only increasing the demand for the shop’s services.Read Article >
What do you know about the fixed displacement piston compressor?
November 2, 2021
What do you know about the fixed displacement piston compressor?Read Article >
J1587/J1708 and J1939 data line diagnostics
October 27, 2021
Modern heavy-duty equipment is basically comprised of computers with operating units attached. In short, it is a multiplexing system that replaces traditional power distribution devices with ECUs that communicate electronically over the vehicle datalink.Read Article >