Refrigerant capacity and mobile A/C service: part 2
June 15, 2021
One of the most frequently asked questions on tech help-line calls concerns refrigerant capacity: How much refrigerant is in that mobile A/C system, and have you checked to be sure the refrigerant is pure?Read Article >
Mobile A/C training when you want it!
June 14, 2021
If you’ve been too busy or the COVID-19 situation has made it difficult for you to attend mobile A/C training MACS has the solution.Read Article >
Refrigerant capacity and mobile A/C service
June 8, 2021
One of the most frequently asked questions on tech help-line calls is: How much refrigerant is in that mobile A/C system, and have you checked to be sure the refrigerant is pure?Read Article >
Temperature testing detective work: The search for a diagnosis
May 25, 2021
Last week we closed our blog post with a discussion about an orifice tube system which had an evaporator outlet temperature that was about 20° warmer than the inlet. We mentioned that this could be an indication of a restricted orifice tube or a refrigerant undercharge. In applying this to diagnostics, it is important not only to understand what this represents, but also why.Read Article >
What is your temperature testing data telling you?
May 18, 2021
If air conditioning systems were transparent where we could see inside them, then diagnostics would be faster and easier. We could look at the systems and see things right away that affect system operation, like restrictions and liquid levels in evaporators and condensers.Read Article >
Pass the temperature probe
May 4, 2021
The first step is to run the A/C system for a few minutes to let it stabilize. Then both probes should be connected side by side at both points that will be temperature tested in the system. For example, if you were testing the temperature drop across the condenser, this would need to be done on both the discharge line and the liquid line.Read Article >
Contact counts in temperature testing
April 27, 2021
Proper contact is vital when connecting to A/C lines using the contact type temperature thermometers. To determine if I am getting good contact, I always like to place both connectors side by side on the same line and observe the temperature readings.Read Article >
MACS Mobile A/C Update Webinar Now Available On Demand
April 22, 2021
Every year the Mobile Air Climate Systems Association creates a special mobile A/C update clinic to help working technicians keep up with the rapidly changing mobile A/C service and repair...Read Article >
Tips for taking your mobile A/C system’s temperature
April 20, 2021
The contact type units do indeed have a high degree of accuracy, but precautions must be taken when using them (especially connecting to lines) to ensure the accuracy. Otherwise, it is possible to get readings that are easily 5° to 10° off and that can lead to an incorrect diagnosis.Read Article >
Temperature testing accuracy
April 13, 2021
Temperature readings can be easily used to determine if an orifice tube system might be undercharged, and they can also be used to charge an orifice tube system. But if the readings are not accurate, all they are going to do is cause you problems.Read Article >
Then things got complicated!
April 9, 2021
It was a 2013 Camaro. The complaint was poor cooling and the temp really would not change when you switched it from heat to cool. In diagnosing the job, the technician found the blend door was stuck to where it was blending heat. Until it was pulled out, the tech was not sure if it was a bad actuator or door.Read Article >
Avoiding an oily situation
April 6, 2021
If you own a mobile A/C repair shop this is when you start to gear up for it, by replenishing your parts inventories and an important segment of those inventories is compressor oil.Read Article >